As you prepare your home for the up coming seasonal changes, be sure to consider your outdoor living space too. Now’s the time to make sure your screened porch is up to the task of keeping you comfortable as you relax outdoors this year. If your screens have seen better days, a new user-friendly system by Screen Tight, which you’ll find at Lowe’s, is the answer. With the simple steps and materials available in this system, practically any do-it-yourselfer will discover how easy it can be to revamp a screened porch. Just think, this spring the most enjoyable room in your house actually might be outside.
Screen Tight 101
The key to the simplicity of the Screen Tight system is the low number of basic materials and tools required. First, base strips are screwed into the pre-existing supports. Next, Before Screened Porch screen pannels are secured into the base strips using screen spine and a screen-spline roller. Finally, caps snap onto the base strips to hide the screen edges and spline.
- Skill Level: Intermediate
- Rough cost estimate: $500; Paint $150, Screening Materials $275, Screen Door $75
- Rough time estimate: 1 weekend
Prior to purchasing your materials, measure your vertical and horizontal support rails. Most are constructed with either 2 x 4 or 4 x 4 boards. Base strips are available in two corresponding widths: 1½ inches and 3½ inches. Also be sure to measure the distance between the vertical supports. Screens are available in widths ranging from 36 to 72 inches. Plan to allow for an excess of at least 6 inches on all four sides, which will be trimmed after the screen is secured into the base strips. For example, if your average width is 60 inches, you will need to purchase 72-inch-wide screen material.
Before you begin, remove all the old screens. Next, pressure wash, scrape, sand, prime, and paint the existing railing, supports, and flooring as needed. Remember to remove all hardware from doors prior to priming and painting. Allow paint to dry completely before starting the installation process. (Tip: Remove any light fixtures that may get in the way when installing the base strips and screens.)
How to Install the Screens Using Screen Tight
The Finishing Touches
As you can see, screens transformed this porch into a more inviting living space. Then all it took was a few additional improvements to make it a comfortable room in which to lounge and entertain.
An all-weather outdoor ceiling fan (#74158) was installed to cool occupants on hot summer days.
The existing light fixtures were not only outdated, but they also did not provide ample light. Two outdoor light fixtures in a rustic brown finish proved to be a good solution.
A vinyl five bar screen door by Screen Tight makes entering the porch a pleasure. A white door-hardware set and hinges complete the finishing touches.
|Lowe’s Shopping List|
|º||1½-inch (8-foot-long) base strips (Screen Tight, black #21532*||º||five-bar vinyl screen door (36-inch, Screen Tight, white, #147344)*||º º||tape measure
|º||3½-inch (8-foot-long) base strips (Screen Tight, black, #21533)*||º||2 outdoor light fixtures (Portfolio, Rustic Brown Finish, #24225)||º||multipurpose snips (Prosnip, #110469)|
|º||1½-inch (8-foot-long) caps (Screen Tight, white)*||º||1 (52-inch) all-weather ceiling fan (Harbor Breeze, white, #74158)||º||RollerKnife (Screen Tight, #52369)*|
|º||3½-inch (8-foot-long) caps (Screen Tight, white #21535)*||º||side table (Brookfield, #172442)||º
rubber mallet (optional, #52651)
|º||72-inch (100)-foot-long) fiberglass Insect screening (Phifer Wire Products, Charcoal, #51182)||º||doorknob (Screen Tight, white, #147345)|
|º||0.175-inch (300-foot long screen spine (Screen Tight, #21984)*|
|*Available through special order in some stores.|
Original Article by Kacy Carroll. Download the article here.